EN
Have your metal tools lost their luster? Do they appear dead and ancient? Using the KELLEN machine to polish your metal tool, you can make it as good as new! Metal Polishing is not only something good looking but also to help keep your tools in tip-top shape.
Getting Ready to Polish
De-Rust and Prepare Tools for Polishing How to clean: Wash your tool with soap and water first. This is extremely important as it will make sure to get rid of any dirt, grease or dust particles on the surface. Skipping this can allow the dirt to obstruct your tool and prevent it from burning as bright as you might like.
After your tool is clean, you need to whip out the polishing machine. After a sit, apply a dab of metal polish on the polishing wheel of your machine. Ensure the wheel first spins slowly. Once you have the polish, you can then raise the speed and begin making that metal shine.
After rinds are pushed in now pull the toolness to and fro very slowly along with the polishing wheel. It is very crucial to press the tool on all four corners in an equal manner. If you press too hard in one area, the metal might polish unevenly and damage it. Consequently, move very equally and responsibly in the most effective ways possible.
Using Tools - What to Do and What not to Do
If you manage to use your tools correctly, the polished job is half done. Here are a few key dos and don'ts to keep in mind when you use your tools:
WEAR protective gear, i.e. gloves and goggles when working with the polishing machine This is why it is very important that you wear the appropriate safety gear with all metal polishing machine and tools during a job so you protect yourself from any flying particles or accidents that may occur.
DO Maintain a Clean Organized Workspace Less clutter means fewer accidents and encourages you to cut your search time shorter when reaching for what you need.
NEVER use your hands to hold on to the tools being polished. It is dangerous since the wheel when it begins to spin can cause some harm. Only handle the metal with tools or grips.
— DO firmly grip tools and always use your grips or clamps. It will make it easier to handle the tool as you polish.
More Tips On Polishing — DO be patientDON'T rush to polish your project! Be patient and do not rush. You also do not want to rush this process or else it is going to make mistakes and they will only unevenly polish the surface of metal which could essentially damage it.
Tips from the Experts
Here are some of the top advice we gained from a few metal polishers we contacted:
First off, begin with a clean tool that is free of any scratches or other issues left in the finish. "
“Make sure you have the right polish for your metal. Polishes are not created equally and using the wrong one can produce some terrible results! "
Be patient and take your time when polishing, you want that fresh, clean surface look. Do not move in an erratic manner or you will have gaps and your sections will be uneven. "
ALWAYS WEAR PROTECTIVE GEAR WHEN USING A METAL POLISHING MACHINE- Use eye protection and gloves. Always think of safety first! "
Polishing materials — A users manual
You can find various types of metal polishing materials. The following explain the popular vegetables types and which work best for what.
Tripoli : A natural mineral suitable for use in polishing softer metals such as brass and aluminum. Great on a buff to shine.
Rouge Rouge is a feathery powder that is good on stainless steel or chrome. It gives you a very good high-gloss look.
White Diamond: White Diamond makes of aluminum oxide polishing compound, used to clean and polish silver, gold or brass. Absolutely can, all of these metals will really pop.
Green Rouge: This unique polishing compound is a "multi-purpose" polisher that works on several different metals such as stainless steel, and aluminum. It is good for an overall polishing.
How To Properly Care For Your Polishing Machine
So, If you want to be in a great working condition of your metal polishing machine then take care of your metal polishing machinery. The following is the way to follow some of the important maintenance tips.
After that, try to clean the machine very well. It will work to get rid of any residues or debris that got created during the polishing process.
Regularly inspect the machine parts such as bearings and bushings. Ensure they are not worn out or destroyed. This would make it easier for the machine to operate.
Add some oil to the polishing wheel. That way, the wheel turns smooth and even to get the best polished surface.
If you see that one of the lines is worn, or otherwise damaged then by all means replace the line. The best way to ensure safety and quality work is not going too wild with speeds.
We hope these hacks and tips will help you get the most out of your KELLEN metal polishing equipment. However, when you learn how to do mirror polishing with the right materials and care, you can make sure that all your metal tools and surfaces always has a perfect super shiny finish! Happy polishing!
ONLINE